>

---

FireProtect Plus

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

• Authentication to prevent forgery
• Jamming detection and communication channels encryption
• Tampering alarm

• Device registers smoke, sharp jumps in temperature, and dangerous CO levels
• Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
• Independently tests the smoke chamber and gives prompt notification of the need to dust

Principle of operation

Detects human presence by temperature difference with background thermal radiation. The microwave sensor prevents false alarms caused by complex interference.

Features

Designed for operation in rooms with fireplaces and air conditioners. Detects and ignores draughts, movement of curtains and blinds, and light flickering, glare and reflections.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Classification	Radio channel smoke detector with temperature sensor and built-in siren
Type of detector	Wireless
Installation method	Indoors
Compatibility	Works independently or with Ajax hubs, range extenders, ocBridge Plus, uartBridge
Sensing element	Photoelectric, CO and temperature sensors
Activation threshold	+59°С ±2°С
Type of notification	Sound/light
Volume of built-in siren	85 dB
Alarm signal delivery time	0.15 s
False alarm filter	+
Interconnected alarms	+
Power supply	Battery: Two CR2 batteries, 3 V Backup battery: CR2032
Battery life	Up to 4 years
Jeweller radio technology	Communication range with central unit — up to 1,300 m in an open space Two-way communication between devices Operating frequencies — 868.0-868.6 MHz Self-adjusting RF output power — up to 20 mW Block encryption based on AES algorithm Detector polling period — 12−300 s
Additional temperature sensor	Available
Operating temperature range	From 0°С to +65°С
Permissible humidity	Up to 80%
Anti-sabotage	Protection against fraud Jamming detection Tamper-resistant
Remote setting and testing	+
Dimensions	132 × 132 × 31 mm
Weight	220 g
Complete set	FireProtect Plus detector SmartBracket mounting panel 2 x CR2 batteries (pre-installed) 1 x backup battery CR2032 (pre-installed) Installation set User’s guide

---

Download the product information

Manual

 

---